Industrial 10HP Economical Air Cooling Compressor Screw Air
Compressor With 7.5KW Belt
1.Accessory Name:Motor / Main Engine / Oil Separator Barrel / Intake Valve / Belt
Pulley / Belt / Minimum Pressure Valve / Cooler / Cool Fan /
Pressure Sensor / Safety Valve / Controller / Compressor's Shell
5.Cooling Method:Air Cooling
HONGKONG JIUBEI CO.,LTD is a professional air compressor
research,development and production of large enterprises.JIUBEI is
one of China's largest professional screw air compressor
manufacturer,and the largest air compressor platform in China.
1.Advanced production equipment
-Japan AMADA CNC punch
-Japan AMADA CNC bending
-German KAPP Rotor Grinder
2.The control way to show the utmost solicitude
3.The overall design is advanced,considerate
Air Compressor Oil Compensating
In the running state, the compressor oil level should be kept between the lowest and highest
oil level, oil will affect the separation effect, less oil will
affect the machine lubrication and cooling performance in the oil
change cycle, if the oil below the minimum Oil level, should be
promptly added lubricants, the method is:
①.Shutdown and other internal pressure release is complete (to
confirm the system without pressure), pull down the power switch.
②.Open the oil and gas separation tank on the fuel port, add the
right amount of cooling oil.
③.The normal operation of the air compressor oil change time see
regular maintenance table.
Installation Site Selection
1. Air compressor installation, to be a good place for wide
lighting in order to facilitate the operation and maintenance.
2. The relative humidity of the air should be low, less dust, clean
air and well ventilated, away from flammable and explosive,
corrosive chemicals and harmful unsafe items, to avoid near the
place of dust.
3. Air compressor installation, the installation site of the
ambient temperature should be higher than 5 degrees in winter,
summer should be less than 40 degrees, because the higher the
ambient temperature, the higher the air compressor discharge
temperature, which will affect the performance of the compressor,
necessary , The installation site should be set ventilation or
4. If the factory environment is poor, more dust, to be installed
before the filtration equipment.
5. Air compressor installation site should be arranged in a row of
air compressor unit.
6. Reserved access, with conditions can be installed crane, in
order to facilitate maintenance of air compressor equipment.
7. Reserved maintenance space, air compressor and wall at least 70
cm above the distance.
8. Air compressor from the top space at least one meter above the
In the case of constant power, when the speed changes, the
volumetric flow and the working pressure also changes accordingly;
For example: a 22KW air compressor, in manufacturing to determine
the working pressure of 7bar, according to the compressor host
technology curve Speed, displacement 3.8 m3 / min; when the working
pressure is determined to 8bar, the speed must be reduced
(otherwise the drive motor overload), then the displacement of 3.6
m3 / min; because the speed decreased, Gas is correspondingly
reduced, and so on.
Power selection is to meet the working pressure and volume flow
conditions, the supply capacity to meet the matching drive motor
power can be used.
Therefore, the optional air compressor steps are: first determine
the working pressure, and then set the corresponding volume flow,
and finally the power supply capacity.
If you have any question, please feel free to contact me:
Skype & WhatsApp:+86135 8098 6043